User Tools

Site Tools


products:8k2_controller

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
Next revision
Previous revision
products:8k2_controller [2024/03/26 13:35]
admin
products:8k2_controller [2024/07/30 19:58] (current)
admin
Line 30: Line 30:
  
 We'll include a small chunk of hook & loop and 8 rubber bumpons if you want to attach some to the buttons. We'll include a small chunk of hook & loop and 8 rubber bumpons if you want to attach some to the buttons.
 +
 +----
 +
 +===== USB Cable =====
 +
 +The device comes with a 10 foot long USB cable. You can replace it with a short (or longer) cable if desired. (Note that 15 feet is the maximum length for a USB cable without using extenders.)
 +
 +You can remove the bottom cover and you'll see where the Micro USB cable is plugged in. As long as your replacement cable can fit in the device it should work just fine.
 +----
 +
 +===== Dimensions =====
 +
 +The enclosure (black box) is 140mm x 35mm x 23mm. Including the buttons the full height of the unit is approximately 25mm tall.
  
 ---- ----
Line 43: Line 56:
   - Send program change (decrease by one)   - Send program change (decrease by one)
   - Send program change (increase by one)   - Send program change (increase by one)
-  - Send value 127 on CC63 when pressed, send value 0 when released. +  - Send value 127 on CC63 when pressed, send value 0 when released 
-  - Send value 64 on CC1 when pressed, send value 0 when released.+  - Send value 64 on CC1 when pressed, send value 0 when released
  
-  * For "Send program change"​ it will start at 0 when powered on, so the first press of  button 6 will change it to 1. (It +  * For "Send program change"​ it will start at 0 when powered on, so the first press of  button 6 will change it to 1. (It will never go below zero or over 127.)
-will never go below zero or over 127.)+
  
-Note: "​Left"​ is the side with the USB cable on it.+  * Note: "​Left"​ is the side with the USB cable on it.
products/8k2_controller.1711478114.txt.gz · Last modified: 2024/03/26 13:35 by admin