Differences

This shows you the differences between two versions of the page.

--- products:8k2_controller [2024/03/26 13:42]
admin
+++ products:8k2_controller [2025/07/02 21:53] (current)
admin
@@ Line 32: / Line 32: @@
 ----
-===== Using the 8K2 Controller =====
-Jason Keene has created some useful videos explaining the functionality of the device:
-DM48X Tips & Tricks #1 \\
-https://www.youtube.com/watch?v=xlNCxFImGcg
-The DM48X Digital MIDI Harmonica - Exciting new features and more! \\
-https://www.youtube.com/watch?v=EI-GpHTKVCQ
 ===== USB Cable =====
@@ Line 48: / Line 38: @@
 You can remove the bottom cover and you'll see where the Micro USB cable is plugged in. As long as your replacement cable can fit in the device it should work just fine.
+----
+===== Dimensions =====
+The enclosure (black box) is 140mm x 35mm x 23mm. Including the buttons the full height of the unit is approximately 25mm tall.
 ----
@@ Line 67: / Line 62: @@
   * Note: "Left" is the side with the USB cable on it.
+===== Changing the Cable =====
+Some people have asked how to change the cable to a longer or shorter one. Note that we have 3 foot, 6 foot, and 10 foot USB cables and the ones we use will all fit the 8K2 Controller, but other cables may not. If you need a different length get in touch,
+==== Step 1 ====
+{{:products:8k2-cable-change-1192.jpg?direct&800|}}
+Remove the four Philpips head screws on the bottom of the unit.
+Once removed you will see the end of the USB cable plugged into the controller board.
+----
+==== Step 2 ====
+{{:products:8k2-cable-change-1194.jpg?direct&800|}}
+Gently lift the cable out of the groove at the end of the enclosure.
+Be careful as forcing it may break the USB port off of the board.
+Wiggle the cable left and right to get it loose... Again, be gentle while doing so.
+----
+==== Step 3 ====
+{{:products:8k2-cable-change-1198.jpg?direct&800|}}
+Once you have the cable free from the port you can remove it.
+----
+==== Step 4 ====
+{{:products:8k2-cable-change-1196.jpg?direct&800|}}
+With the cable removed you can now insert the replacement.
+It may help to bend the cable as shown for insertion.
+----
+==== Step 5 ====
+{{:products:8k2-cable-change-1198.jpg?direct&800|}}
+Now you'll basically reverse the process.
+Gently insert the replacement cable.
+----
+==== Step 6 ====
+{{:products:8k2-cable-change-1201.jpg?direct&800|}}
+Once the cable is plugged in lay it into the groove in the enclosure.
+With the cable in place you can put the bottom cover back on.
+Make note of the orientation. The small hole in the cover needs to be over the white reset button on the board.
+Make sure to not over-tighten the screws when putting the cover back on.
+----
+==== Notes ====
+**Remember to go slow while doing this, and to not force anything.**
+If you get stuck please get in touch with us for assistance.

codex.2xlnetworks.net

User Tools

Site Tools

Differences

Page Tools