Differences

This shows you the differences between two versions of the page.

--- products:8k2_controller [2025/07/02 21:46]
admin
+++ products:8k2_controller [2026/01/12 20:42] (current)
admin
@@ Line 54: / Line 54: @@
   - Toggle CC24 (127 for first press, 0 for second)
   - Toggle CC25 (127 for first press, 0 for second)
-  - Send program change (decrease by one)
+  - Toggle CC26 (127 for first press, 0 for second)
-  - Send program change (increase by one)
+  - Toggle CC27 (127 for first press, 0 for second)
-  - Send value 127 on CC63 when pressed, send value 0 when released
+  - Toggle CC28 (127 for first press, 0 for second)
-  - Send value 64 on CC1 when pressed, send value 0 when released
+  - Toggle CC29 (127 for first press, 0 for second)
-  * For "Send program change" it will start at 0 when powered on, so the first press of  button 6 will change it to 1. (It will never go below zero or over 127.)
   * Note: "Left" is the side with the USB cable on it.
+----
 ===== Changing the Cable =====
@@ Line 98: / Line 98: @@
 ==== Step 4 ====
+{{:products:8k2-cable-change-1196.jpg?direct&800|}}
+With the cable removed you can now insert the replacement.
+It may help to bend the cable as shown for insertion.
+----
+==== Step 5 ====
+{{:products:8k2-cable-change-1198.jpg?direct&800|}}
+Now you'll basically reverse the process.
+Gently insert the replacement cable.
+----
+==== Step 6 ====
+{{:products:8k2-cable-change-1201.jpg?direct&800|}}
+Once the cable is plugged in lay it into the groove in the enclosure.
+With the cable in place you can put the bottom cover back on.
+Make note of the orientation. The small hole in the cover needs to be over the white reset button on the board.
+Make sure to not over-tighten the screws when putting the cover back on.
+----
+==== Notes ====
+**Remember to go slow while doing this, and to not force anything.**
+If you get stuck please get in touch with us for assistance.

codex.2xlnetworks.net

User Tools

Site Tools

Differences

Page Tools