User Tools

Site Tools


products:the_big_button

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
Next revision
Previous revision
products:the_big_button [2025/10/26 12:30]
admin [Dimensions]
products:the_big_button [2025/10/26 13:01] (current)
admin
Line 39: Line 39:
 ===== Dimensions ===== ===== Dimensions =====
  
-The enclosure (black box) is 119mm x 94mm x 49.5mm+==== Enclosure ====
  
-The "​official"​ specs list the enclosure (black box) as: 119 mm 94 mm 56 mm+The enclosure (black box) is listed ​as being 119mm 94mm 56mm... But the enclosure has an angle from the bottom to top, so here are the dimensions I've measured:
  
-But the enclosure has an angle from the bottom ​to top, so here are the dimensions I've measured:+**Bottom:** 119.5 mm x 94 mm (4mm radius corners) \\ 
 +**Top:** 115.75 mm x 90 mm (4mm radius corners) \\ 
 +**Height (with bottom ​attached):** 57mm \\
  
-Bottom: 119.5 mm x 94 mm (4mm radius corners) \\ +Note that we apply rubber non-slip feet to the bottom, which adds about 2.5mm. These can be easily removed.
-Top: 115.75 mm x 90 mm (4mm radius corners) \\ +
-Height (with bottom attached): 57mm \\+
  
 +==== Button ====
  
-The big button itself is 100mm wide by 72mm tall (not counting ​the part that gets mounted inside ​the enclosure).+The big button itself is 100mm wide by 83mm tall(the 83mm includes ​the button/​electronics below the surface.)
  
 +45mm of the button is visible __above__ the surface. The button needs approximately 38mm below the top surface for the button/​electronics mounted below it.
  
 +The black collar is 17.5mm tall. There is a small gap, and then the curved black part above the black collar (right below the colored dome portion) is 8mm tall.
  
 ---- ----
products/the_big_button.1761499810.txt.gz · Last modified: 2025/10/26 12:30 by admin