This shows you the differences between two versions of the page.
| Both sides previous revision Previous revision Next revision | Previous revision | ||
|
products:the_big_button [2025/10/26 12:51] admin |
products:the_big_button [2025/10/26 13:01] (current) admin |
||
|---|---|---|---|
| Line 41: | Line 41: | ||
| ==== Enclosure ==== | ==== Enclosure ==== | ||
| - | The enclosure (black box) is listed as being 119mm x 94mm x 56mm | + | The enclosure (black box) is listed as being 119mm x 94mm x 56mm... But the enclosure has an angle from the bottom to top, so here are the dimensions I've measured: |
| - | But the enclosure has an angle from the bottom to top, so here are the dimensions I've measured: | + | **Bottom:** 119.5 mm x 94 mm (4mm radius corners) \\ |
| + | **Top:** 115.75 mm x 90 mm (4mm radius corners) \\ | ||
| + | **Height (with bottom attached):** 57mm \\ | ||
| - | Bottom: 119.5 mm x 94 mm (4mm radius corners) \\ | + | Note that we apply rubber non-slip feet to the bottom, which adds about 2.5mm. These can be easily removed. |
| - | Top: 115.75 mm x 90 mm (4mm radius corners) \\ | + | |
| - | Height (with bottom attached): 57mm \\ | + | |
| - | + | ||
| - | Note that we apply rubber non-slip feet to the bottom, which adds about 3mm. These can be easily removed. | + | |
| ==== Button ==== | ==== Button ==== | ||
| - | The big button itself is 100mm wide by 83mm tall. (This includes the button/electronics below the surface. | + | The big button itself is 100mm wide by 83mm tall. (the 83mm includes the button/electronics below the surface.) |
| - | 45mm of the button is visible above the surface. The button needs approximately 38mm below the top surface for the button/electronics mounted below it. | + | 45mm of the button is visible __above__ the surface. The button needs approximately 38mm below the top surface for the button/electronics mounted below it. |
| - | The black collar is 17.5mm tall. There is a small gap, and then the curved black part above the black collar (right below the colored portion) is about 8mm tall. | + | The black collar is 17.5mm tall. There is a small gap, and then the curved black part above the black collar (right below the colored dome portion) is 8mm tall. |
| ---- | ---- | ||